Universal use passenger cars,
commercial vehicles and motorcycles.

AVL DITEST SPEED 2000

The AVL DITEST SPEED 2000 is the easiest, the fastest and the most universal way to carry out engine speed measurements for petrol and diesel engines - both statically and dynamically. The combination sensor for recording revolution speed (which measures the vibration and the sound of the engine) is installed with a magnetic foot at or near the engine.

The structure-borne sound analysis (engine vibration) as well as the air-borne sound analysis (noise of the motor) is used for the revolution speed detection. Having developed unique processing software, it is possible to evaluate highly dynamic revolution speeds precisely. It is as simple as that, even for motorcycles, whether 4-stroke or 2-stroke engines.

FUNCTIONS AT A GLANCE

  • Speed measurementfor stationary anddynamic speed curves
  • Forpetrol and diesel engines(best coverage)
  • No setting of cylindernumbers required
  • Easy mounting thanks tointegrated permanent magnets
  • Automatic self-calibrationandfunction monitoring
  • Uniqueanddirectsignal pickup
  • Future-proofdue to independence ofelectricalmotorsignals
  • Compatible witheveryemission tester

More details at a glance

  • Unique and direct signal pick up via structure-borne sound
  • No setting of cylindernumbers required
  • Easy mounting thanks tointegrated permanent magnets
  • Universalconnection to anyemission tester possible
  • For stationaryanddynamic speed measurement
  • Forpetrol and diesel engineswith the highestcoverage rate
  • Automatic self-calibrationandfunction monitoring
  • Standardfor passenger cars, commercial vehiclesand motorcycle2-/4-stroke
  • Modeswitch integrated in device
  • USB 2.0 interface integrated
  • Data transferand softwareupdate via USB

Easy

  • The combination sensor is installed with a magnetic foot to the vehicle


Fast

  • Disassembly, manual calibration and laborious settings are not required


Universal

  • The AVL DITEST SPEED 2000 can be used on passenger cars, commercial vehicles and motorcycles, no matter how many cylinders the engine has

INLCUDED IN BASIC DELIVERY

AVL DITEST CDS 450 combination emission analysis station

  1. AVL DiTEST Speed 200
  2. Combination sensor

Optional Equipment

Display

For the attachment to the AVL DITEST SPEED 2000 casing.

POWER SUPPLY

For the AVL DITEST SPEED 2000 power supply.

MOUNTING SUPPORT

For the simple contact of AVL DITEST’s
combination sensor on all engines without
ferromagnetic mounting interfaces

Adapter

for fitting clamp-on transducer cable.
A clamp-on transducer signal is simulated
based on the engine speed.

Extension cable

For AVL DITEST combi sensor
Length: 5m

top
This site uses cookies. By accepting cookies, you can optimize your browsing experience. Please read our Privacy Statement for more information. Read more …